A simple top mounted motor mount. Just glue and go, or perhaps sticky tape and go. Great for testing prototype wings.
To suit the same motor as in the ZOHD Nano Talon.
2204 1870KV Brushless Motor
which normally uses a 6×3 6030 Propeller
40A Brushless ESC With 5V 3A BEC Spare Part For ZOHD Talon GT
Dimensions in mm
AOA (Angle of attack) 7 degrees pitch forward.
3D printing notes :
- Print time approx 11hours 5minutes
- 1.75mm PLA filament used = approx 20m
- Approx printed weight = 60g
- 0.1mm sliced layers
- Originally printed on a Tevo Tornado
This design is copyright to Dion Patelis and Xortig. For further distribution of this file, please contact Xortig.